OO-KUMA Performance ABS Snow White 1.75mm Filament

OO-KUMA Performance ABS Snow White 1.75mm Filament info

OO-KUMA Performance ABS Snow White 1.75mm Filament from 3D printing material manufacturer Oo-Kuma provides minimal warping and good flowability.

Performance ABS Filaments have excellent inter-layer bonding while it is still pretty easy to remove supports. These filaments are tested by most of the 3D printers found in the market like Up!, Makerbot, Ultimaker, Solidoodle, Leapfrog, Zortrax, Kemiq, etc.

Note that Performance ABS Filaments are designed for high temperature hot ends. The spool size is 700g

OO-KUMA Performance ABS Snow White 1.75mm Filament - General Specifications

• Snow white 1,75mm ABS filament
• 700g spool
• Minimal warping
• Good flowability
• Excellent inter-layer bonding
• Easy to remove supports

OO-KUMA Performance ABS Snow White 1.75mm Filament - Technical Specifications

Physical:

• Specific Gravity: 1,05g/cm³
• Water Absorption: 0,2 – 0,5%
• Mold Shrinkage: 0,4 – 0,7%

Mechanical:

• Tensile Strength (at yield): 43MPa
• Elongation (at break): 40%
• Flexural Strength: 70MPa
• Flexural Modulus: 2100MPa
• Izod Impact Strength(23°C): 19KJ/m²
• Charpy Impact Strength (23°C): no break
• Rockwell Hardness (R scale): 109

Thermal:

• Heat Deflection Temperature (1,8MPa, Annealed): 100°C
• Heat Deflection Temperature (1,45MPa, Under Load): 104°C
• Vicat Softening Temperature (B50): 102°C

Flammability:

• Flame Rating - UL (1,6mm): HB

Videos

Documents

Oo-Kuma Performance ABS Datasheet

References

Oo-Kuma Product Page: http://www.oo-kuma.com/store/p56/Performance_ABS_Snow_White.html